Do you know how to bond things more steadily with hot melt sticks? The hot-melt glue stick is white opaque (strong type), non-toxic, easy to operate, and the hot-melt glue stick has no carbonization phenomenon when used continuously, and has the characteristics of rapid bonding, high strength, aging resistance, non-toxic, good thermal stability, and adhesive film toughness. In addition to the type of glue stick, the use of hot melt glue stick method is also very important, and the following aspects are more important:
1. The temperature of the hot melt glue stick should be sufficient
The feel of the hot melt glue stick is not much different when the glue gun is squeezed and when the hot melt glue stick is not installed. You can touch the plastic shell near the tip of the hot melt glue gun, if it feels hot, it means that the hot melt glue gun has heated the hot melt glue stick at a temperature of enough.
2. The hot melt glue stick exerts a certain pressure
After the hot melt glue stick is sent to the object, the two pieces of material to be bonded are bonded together, and a certain amount of pressure needs to be applied. Because after a certain pressure is applied to the hot melt glue stick, the melt of the hot melt adhesive can penetrate well into the small gaps of the material, and the hot melt glue stick can produce a strong adhesive force.
3. Touch the wire drawing with the tip of the hot melt glue stick
Hot melt glue guns often produce filaments, which are constantly pulled. In fact, as long as the filament of the hot melt glue stick is touched by a sufficiently high temperature of the metal, the filament will break, that is, the hot melt glue stick only needs to be touched with the tip of the hot melt glue gun to pull out the filament of the hot melt glue stick.
